Great product
RHINO vs Other Cleaners
Rhino Resin Cleaner outperforms traditional cleaners like IPA and other resin wash solutions in safety, efficiency, and results.
Whether you're using a wash station, ultrasonic cleaner, or just a brush and bucket, Rhino delivers crystal-clear prints without the toxic fumes, fire risk, or sticky residue. Unlike IPA, it’s non-flammable, low-odor, making your post-processing faster, safer, and easier every time.
FAST
EFFECTIVE
LONG LASTING
PRECISION
NON FLAMMABLE
BIO-DEGRADABLE
LOW ODOR
REUSABILITY
SAFE
RHINO RESIN CLEANER
TO SEE THE BEFORE AND AFTER COMPARISON SLIDE THE GREEN TOGGLE BACK AND FORTH.
BEFORE RHINO
AFTER RHINO
WHAT OUR CUSTOMERS ARE SAYING...
Customer Reviews
Overall rating: 4.4 / 5 from 255 reviews.
It works better than IPA to clean your resin print s.
Honestly, I was skeptical about Rhino. IPA seems fine, but the smell seems to hang in my nose for hours after using it. I finally tried Rhino while it is on sale and kept my expectations low. I am pleasantly surprised. It works a little slower than IPA, and doesn't evaporate quickly, so you need to wipe it dry more so than IPA. Once dry, the surfaces aren't sticky like when using IPA. It works to dissolve the uncured resin very well. I cleaned the cover of my Saturn 4 16K. I guess I didn't clean the bottom lip very well, so the Rhino caused the uncured sticky resin to collect between the cover and base. I didn't print for a couple weeks, and when I came back, the resin had cured enough to glue the cover closed. Oops. I got it unstuck ok, but it just impressed me that the Rhino got so much sticky resin off the front that it could result in gluing the cover shut. My error, of course. Now my bench and tools aren't sticky either. Oh, and my nostrils are much happier. Rhino is now my go-to resin solvent. Nice!
cleans the prints fantastic. 1000% better than the odor of using ipa. well worth the cost.
I love how effective it was in getting the resin from all of my prints and tools. I will be buying again!
I recently made the decision to completely switch my 4 step cleaning system over from denatured alcohol to Rhino cleaner. As you can see from the pictures, the parts are very clean and no sticky residue left behind, even after 200 plus plates have been cleaned. Total run time for the trial was 17 days at 18 plates (full body kits, not just small parts) a day and parts were still coming out as clean as day one. Yes, the cost is a little more but in the long run I will use less Rhino cleaner vs alcohol, making the extra initial cost worth it. We are also seeing a huge reduction in VOC’s. Another plus to Rhino cleaner. I highly recommend switching to Rhino cleaner to clean your resin projects.
Great product!
I was surprised at how well it worked. I was able to clean parts of my printer that have been driving me crazy!! VERY Impressed!
All good, recoomend.
I've been eyeing Rhino Resin Cleaner for awhile. The price always kept me at arms Length, The B2G1 Sale got me to try the product.. Let me say it's pretty amazing to start. First of all the smell is actually quite nice. But it cleans minis way better then IPA. I mass print stuff, I go through 50KG's of Resin every 6 months. Along with 4 gallons of IPA. My IPA gets sticky and leaves residue pretty quickly. Where I wash Minis in IPA they come out tacky and leave visible resin that when cured looks SHINEY like they're wet. This has caused some returns in my sales. That's one problem Rhino Resin has completely taken care of. Also next. I can use Rhino Resin in my Ultra Sonic Cleaner. So far it's worked amazingly. I can actually reduce my wash time with the ultrasonic cleaner.. The only thing I've noticied that i'm not 100% sure of. The lid of my ultrasonic cleaner has this weird stuff appearing at the top of it. I think what's happening is. while it's running it gets hot 140 degrees. It starts to evaporate touches the lid and cools drops back in the water. but I think the resin stays stuck to the lid. Which is wild it's messing up the lid, but it's keeping the Rhino Cleaer really clean. I can't for sure say that's what is happening, but i've used the ultra sonic now for about a year, these solid grey drops only started appearing when I started using rhino cleaner. That was my only true concern is I'd pay the premium price, but when I run a ton of miniatures through the Rhino it would get sticky like the IPA. but so far the Rhino resin is still ultra clear. I am dipping my minis in IPA quickly to just wash them off before I put them in the ultrasonic cleaner with Rhino in it.
It works VERY well. Way better than isopropyl as a resin cleaner. I dint see muself gojng back easily
Works great, the models come out really clean and it washes off with no problems.
Amazing product. Keeps my printer much cleaner then alcohol
This stuff is AMAZING!! My wife hasn't complained once about the smell, and that alone makes it worth every penny. I had a small issue with my shipment (darn UPS drivers using packages as soccerballs I think!) But the customer service department took care of my instantly. I will absolutely be buying more, because this stuff works wayyyyy better than alcohol for me.. and its not 3 gallons of highly flammable liquid sitting in a container. It seems to work extremely well with Anycubic resin.
Doesn't smell as bad as the last stuff i was using. And actually cleans my prints and dries quickly.
This works great!
Received as described. The packages have endured the high heats mid summer weather and rough UPS handling.
Product is exactly what I was looking for. Thank you.
Fast shipping great product, who needs more than that.
👍
Works as they say it does.
I am pleasantly surprised at how clean my printed model work is now as compared to prior cleaning with IPA. NO COMPARISON in my opinion.
Very fast shipping , excellent product…great sale!
I love having a chemically stable and safe product to use for my resin prints
100% better than alcohol. Pleasant scent, non-flammable. And it cleans the liquid resin off in less time and much more thoroughly. Great product!
Works as advertised.
Works like a charm. Since I'm only a hobbyist, a gallon lasts a while, making things look their best
I run a 4 stage cleaning system in my print farm. I’ve been wanting to eliminate the use of denatured alcohol and decided to give Rhino a try. Rhino works amazingly well in stages 1 and 2. I will be changing the entire system over to Rhino cleaners. I just ordered 8 more gallons. Thanks for a great product! Reducing the VOC’S and creating a safer environment are key reasons for switching.
I have 2 resin printers, a Satan and its lil brother. They had some resin build up on the plates and orange cases; the product cleaned it all off without an issue. Very pleased.
Anytime I can get flammable material out of the lab, is good it works great.
I am really pleased with this cleaner. It keeps my printer pristine and my work space is no longer covered in sticky IPA resin combo. It smells okay and my prints are cleaner and cure more completely. The shipping cost added to the expense so I would definitely order more than one gallon next time!!
I’ve been using IPA since I started 3D printing, but I wanted to see if Rhino lived up to the hype. It did not disappoint. After giving them a 10 minute bath in my cleaner and a curing, my prints look so much crisper and cleaner!
The best cleaning product to get.
My prints cleanup beautifully, and it does not stink up a room!
Great product will continue to use
Its works and doesn't smell
I am currently using it as a final wash and it works great! I use it to wipe down the work area and it works wonders.
The box appeared beaten nearly to death by the shipping company, but the two gallon containers of Rhino resin wash within it were in perfect shape. Arrived on time. Will order again.
Great stuff!
Works great, but I feel the S&H price might keep some users from ordering again.